产品特性:
墙塑专用胶
适用于≤1.8mm厚度PVC墙面
良好的耐水性
优异的粘结力
水性环保
施工方法:
使用前应充分搅拌均匀。建议用A1、A2锯齿刮刀均匀的涂刮,铺展后晾胶时间在5-30分钟,即可铺设上述地面材料。
注意事项:
封面基层平整,清洁,牢固。
铺下地板后先用软木板推压,确保粘合剂全部粘合到地板的背面。要确保良好的通风和对施工最佳温度和温度条件。低温或高温会明显地延长干燥时间或推迟粘结强度的发展。在粘结剂的强度还示完全达到前,要防止过度使用。
Features:
Plastic
wall special glue
Suitable
ofr wall thickness of PVC ≤ 1.8mm
Excellent
Waterproof Performance
Excellent
Bonding Strength
waterborne
environmental protective
Construction
Method:
Stir
it evenly before usage. It is suggested to use A1 or A2 sawtooth blade and lay
the ground for 5 to 30 minutes before laying the materials above.
Notices:
The wall base flat, clean, firm. press the new
leid floor by soft wood panel then a roller to ensure the adhesion between the
bonding agent and the floor. Ensure the good ventilation, temperature and
humidity for construction. Lower or higher temperature may delay the time for
drying or influence the bonding strength. Don't over use it before the bonding
strength is not reached. S