产品特性:
亚麻软木粘结剂
适用广泛,施工便利
超强粘结力
无溶剂,环保型
涂布量大,用量经济
施工方法:
选用B1锯齿刮刀均匀地涂布。不需要再涂布过多的粘结剂,只要能覆盖就行,该产品在可工作时部内进行粘贴。
根据基层的孔隙率和施工现场的气温和湿度。晾置约20分钟时间后,然后铺上地板用50公斤至70公斤重的金属滚轮压实地板,排除地板下的空气。可达到很好的效果。
铺设地板前请参阅地板供应商的相关施工资料。
注意事项:
要确保良好的通风和对施工最佳的温度和湿度条件。低温或高温度会明显地延长干燥时间或推迟粘结强度的发展。在粘结剂的强度还未完全达到前,要防止过度使用。
Features:
Linoleum
Adhesive
widely
used and easy for construction
strong
bonding farce
non-soluvent,
environmental protective
with
large coating weight and economical
Construction
Mathod:
Coat
by B1 sawtooth blade. Use a proper amountto cover the part needed, no need for
more.
Lay
it for about 20minutes according to porosity, weather and temperaturs,and press
the floor with metal roller about 50kg to 70kg to remove the air remained under
the floor.
read
the construction manual provided by the floor supplier before floor laying.
Notices:
Ensuer
the good ventilation, temperature and humidity for construction. Lower or
higher temperature may delay the time for drying or in fluence the bonding
strength. Don't overuse it before the bonding strength is not reached.